Windshield Van Bodies

Relative to other non-Unruh Fab folding peg racks where all the pegs fold in the same direction, the Model 150 and 200 offer the advantage of having the pegs fold at an angle.

Since windshields are curved, having both pegs fold straight back can be problematic since they will fold into the center bow of the windshield with the front pegs or the tail with the rear pegs. This can force delivery personnel either to lift the windshield over the peg or trying to slide the windshield around the peg; either of these approaches defeats the purpose of having folding pegs.

By having the common direction pegs fall at an angle, the user can drop both pegs before removing the windshield easily.

Features:

• Capacity: Up to 15 (Model 150) or 20 (Model 200) automotive windshields
• Folding pegs 20″ usable height
• Pegs fold down at 15 degrees, allowing the peg to fall around the center bow and tail of the windshield rather than into the windshield
• 5/8″ Pegs for added strength and durability
• Caster rear wheels and front bearings; Two of each for each rack
• Built-in lock system with spring
• Can be installed in commercial vans, Sprinter, ProMaster, NV or Transit vans or boxes (as shown)

˜

Model 230VR

• Capacity: 23 windshields
• Folding pegs 21″ high
• Capable of rolling out rear door
• Ball bearing rollers
• Built-in lock system with spring
• Steel construction
• White paint finish

Model 170VS

• Capacity: 17 windshields
• Folding pegs 21″ high
• Capable of rolling out side door
• Ball bearing rollers
• Built-in lock system with spring
• Steel construction
• White paint finish

The 380 Ergonomic Rack is an extremely heavy-duty rack with eight ball bearings plus eight steel rollers. The pegs fall in opposite directions away from the center of the windshield reducing potential damage to the glass. The rack has a walk-in design that allows the delivery person to step into the rack between the pegs, lifting the glass without leaning over, thereby minimizing back injury.

Features:

• 8′ Long x 5’6″ inside height
• One 83-1/2″ wide opening with aluminum roll-up door on each side of van body
• Window in front and rear wall
• Translucent fiberglass roof
• Fiberglass reinforced floor
• Split ergonomic windshield rack
• 38 windshield capacity

Features:

• Capacity: 44 windshields
• Aluminum van body
• Roll-up doors can be opened at same time
• Optional front flat glass rack

Features:

• 12′ Aluminum van body
• Front and rear windows
• Translucent fiberglass roof
• 84″ Overall body width; 5’6″ inside
• 1/2 Plywood floor
• One 131-1/2″ wide door opening on each side of body
• Interior front parts box
• Interior lights
• 65-Lite stationary windshield rack with removable pegs

Features:

• Capacity: 88 windshields
• Aluminum van body
• Roll-up doors can be opened at same time
• Optional front flat glass rack